RUIJIE RG-WS6008 WLAN CONTROLLER

Model

RG-WS6008


– Interfaces

Service Ports
6x 1000BASE-T ports
2x 1000BASE-T/1000BASE-X ports (combo)

Console Ports
1x Console Port

USB Ports
2x USB ports

– Performance

Switching Capacity
N/A

Packet Forwarding Rate
N/A

Default Number of Manageable APs
32

Maximum Number of Manageable APs
224 APs or 448 wall APs (with license upgrade)

Maximum Number of Configurable APs
2,048

Maximum Number of Clients
6,400

802.11 Performance
8Gbps

VLAN
4,094

Maximum Number of Clients Supported by the Built-in Portal
1,500

ACL
64K

Number of Wireless Users
6,400

MAC Address Table
16K

Local Authentication
300 wireless clients

ARP Table
12K

IPv6 Neighbor Table
10K

Inter-AC Roaming Switch Time
≤50ms

– Power

Power Supply
-Fixed power supply 100VAC to 240VAC, 50Hz to 60Hz

Power Consumption
<40W

– LAN

802.1Q VLAN
Support

PoE
N/A

QinQ
N/A

ACL
Standard IP ACL, Extended IP ACL, MAC-extended ACL, Expert ACL

QoS
N/A

Bandwidth control
Support

– WLAN

LAN Protocols
ARP, VLAN, 802.1p, 802.1q, 802.1d, 802.1w, 802.1s

802.11 LAN Protocols
802.11, 802.11b, 802.11a, 802.11g, 802.11d, 802.11h, 802.11w, 802.11k, 802.11r, 802.11i, 802.11e, 802.11n, 802.11ac

Pre-AX
Supported

CorrectLink
Supported

AirReorder
Supported

CAPWAP
Layer 2/Layer 3 network topology between an AP and AC
Enable an AP to automatically discover an accessible AC
Enable an AP to automatically upgrade software version from an AC
Enable an AP to automatically download configurations from an AC
Network Address Translation (NAT) traversal

Roaming
Intra-AC roaming, Inter-AC roaming

Forwarding
Local forwarding, Centralized forwarding

Wireless QoS
AP-based bandwidth control, WLAN-based bandwidth control, User-based static and smart speed control, Fair balancing

User Isolation
AC-based user isolation
AP-based user isolation
WLAN-based user isolation

Reliability
Fast switching between 2 ACs, Multiple ACs redundancy (1:1 A/A and A/S, N:1), Multiple ACs clustering (N:N), Remote Intelligent Perception Technology (RIPT), Service upgrade

STA Management
AP-based STA access control, SSID-based STA access control, AP-based load balancing, AP traffic-based load balancing, 5G priority access, RSSI threshold

STA RSSI Threshold
0 to 100

STA Idle Timeout
60 to 86,400 seconds

STA Average Data Rate Threshold
8 to 819,200 with the accuracy of 8Kbps

Adjusting Transmit Power of Beacon and Probe Response
Support

Offline Syslog
Support

– Security

IPv4/v6 Security
Web authentication, 802.1x authentication (EAP-PEAP, EAP-SIM, EAP-MD5, EAP-TLS, EAP-TTLS, PEAP-MSCHAPv2, EAP-FAST, EAP-AKA), MAC address authentication

PPSK
Supported

Virtual AP
Supported

Virtual AC
Supported

802.11 Security and Encryption
Multiple SSIDs, SSID hiding, 802.11i-compliant PSK authentication, WPA and WPA2, WEP (WEP/WEP128), WAPI, TKIP, CCMP, Protection against ARP spoofing

AAA
IEEE 802.1X

CPP
Support

NFPP
Support

WIDS/WIPS
Support

– Internet Protocols

IPv4 Protocols
Ping, Traceroute, DHCP Server, DHCP Client, DHCP Relay, DHCP Snooping, DNS Client, NTP, Telnet, TFTP Client

IPv6 Protocols
DNSv6 Client, DHCPv6 Relay, DHCPv6 Server, TFTPv6 Client, FTPv6 Server, FTPv6 Client, IPv6 CAPWAP, ICMPv6, IPv6 Ping, IPv6 Traceroute, Manual tunnel, automatic tunnel
Manual configuration address, automatic local address

IPv4 Routing
Static routing, OSPF

IPv4 Routing Table Capacity
8K

IPv4 Static Routing Table Capacity
1K

IPv6 Routing
Static routing

IPv6 Routing Table Capacity
1K

IPv6 Static Routing Table Capacity
1K

– Management and Maintenance

Network Management
SNMP v1/v2c/v3, Web management, Syslog

Network Management Platform
Web management (Smart-web), RG-SNC management, Heat Map diagram

WIS Integration
Supported

User Access Management
Login via console port
Login via Telnet
Login via SSH
Upload to FTP

– Physical Specification & Others

Lock
Support

LED Indicators
Status, Link/ACT

Dimensions (W x D x H) (mm)
440 × 200 × 43.6

Rack Height
1RU

Weight
2kg

– Environmental Specifications

Temperature
Operating Temperature: 0ºC to 45ºC
Storage Temperature: -40ºC to 70ºC

Humidity
Operating Humidity: 10% to 90%RH (non-condensing)
Storage Humidity: 5% to 95%RH (non-condensing)

Operating Altitude
0-3000m

– Certification

EMC Standard
GB9254
EN301 489

Safety Standard
GB4943
EN/IEC 60950-1