Description:

Ruijie AP730-L with unique Wave 2 Tri-band deign is optimized for high density user in SME environment which catering upto 768 users without any issue.

Feature:

Model
Ruijie AP730-L

Target Deployment
SME High Density Wi-Fi

Type
Indoor Ceiling/Wall-mounting

Basic Spec
Radio
Tri-band (2.4G+5G+5G)

Protocol
802.11a/b/g/n/ac
Wave2

Operating Bands
802.11b/g/n: 2.4GHz to 2.483GHz
802.11a/n/ac: 5.150GHz to 5.350GHz, 5.47GHz to 5.725GHz, 5.725GHz to 5.850GHz (vary depending on countries)

Antenna
Built-in Omni-directional Antenna

Antenna Gain
2.4G: 3dBi
5G: 3dBi

Max Throughput
Maximum throughput of 2.4G: 400Mbps
Maximum throughput of 5G: 1.73Gbps
Maximum throughput per AP: 2.13Gbps

Modulation
OFDM:BPSK@6/9Mbps,QPSK@12/18Mbps,16-QAM@24Mbps,64-QAM@48/54Mbps
DSSS:DBPSK@1Mbps,DQPSK@2Mbps,and CCK@5.5/11Mbps
MIMO-OFDM:BPSK, QPSK, 16QAM, 64QAM, 256QAM

Receiver Sensitivity
11b:-96dBm(1Mbps),-93dBm(5Mbps),-89dBm(11Mbps)
11a/g:-91dBm(6Mbps),-85dBm(24Mbps),-80dBm(36Mbps),-74dBm(54Mbps)
11n:-90dBm(MCS0),-70dBm(MCS7),-89dBm(MCS8),-68dBm(MCS15)
11ac HT20:-88dBm(MCS0), -63dBm(MCS9)
11ac HT40:-85dBm(MCS0), -60dBm(MCS9)
11ac HT80:-82dBm(MCS0), -57dBm(MCS9)

Spatial Streams
2×2

Maximum Transmit Power
100mW

IP Rating
IP41
 

Ports
1 x 10/100/1000BASE-T Ethernet uplink
Port LAN1 supports PoE+
1 x Console Port

Power
Power Supply
local power supply (DC 48V/0.6A), PoE (802.3at)

Power Consumption
<25.5W

WLAN
Maximum clients per AP
768

BSSID capacity
48

Remote Intelligent Perception Technology (RIPT)
Support

Intelligent load balancing based on the number of users or traffic
Support

STA control
Support

Bandwidth control
Support

Preference for 5GHz (band select)
Support

Band Steering (5G Priority)
Support
 

Security
PSK, Web, 802.1x authentication
Support

PPSK authentication
Support

Data encryption
WPA (TKIP), WPA2 (AES), WPA-PSK, and WEP (64 or 128 bits)

PEAP authentication
Support

User isolation
Support

Rogue AP detection and countermeasure
Support

RADIUS
Support

Wireless Intrusion Detection System(WIDS)
Support

Wireless Intrusion Prevention System (WIPS)
Support

Routing
IPv4 address
Static IP address or DHCP reservation

IPv6 address
Manual or automatic configuration

Multicast
Multicast to unicast conversion

Management and Maintenance
Network management
SNMP v1/v2C/v3, Telnet, TFTP, Web management

Cloud AC management
Support

FAT/FIT switching
Support

External Characteristics
Lock
Support

LED Indicators
1 LED indicator (red, green, blue, orange, and flashing modes, breathing flashing mode for smart device access, and the indicator can be switched off to enable silence mode)

Relevant Standard
Wi-Fi Alliance Certification
Support

Radio Standard
EN300 328
EN301 893

EMC Standard
GB9254
EN301 489-1
EN301 489-17
EN 55032
EN 61000
EN 55035

Safety Standard
GB4943
EN/IEC 60950-1

Specifications
Dimensions (W x D x H) (mm)
230 × 230 × 42

Weight
1.3kg

Work Environment
Temperature
Operating Temperature:
-10°C to 50°C
Storage Temperature:
-40°C to 70°C

Humidity
Operating Humidity:
5% to 95% (non-condensing)
Storage Temperature:
5% to 95% (non-condensing)